|
FOR G.E. DISHWASHERS |
|
WD12X5028 Round Sump Cover Sump Cover used on GE/Hotpoint and J.C. Penney dishwashers. Replaces WD12X5028 |
|
WD7X14 Door Cable Door cable used on GE/Hotpoint and J.C. Penney dishwashers. Also on some Magic Chef, Jenn Air, and Tappan. Replaces WD7X14, 2190-0001, and DW309 |
|
WD8X227 Corner Door Gasket Left side corner gasket. Used on plastic tub models built by GE. Replaces WD8X227 |
|
WD8X228 Corner Door Gasket Right side corner gasket. Used on plastic tub models built by GE. Replaces WD8X228 |
|
WD3X749 Soap Cup Door Spring Small spring used on plastic tub models with round soap cup cover built by GE. Replaces WD3X749 |
|
WD6X183 Door Switch Door latch switch used on models built by general Electric. Replaces WD6X183 and DW440 |
|
WD13X61 Door Latch Door latch used on models built by general Electric. Replaces WD13X61 and DW604 |
|
WD1X1147 Door Spring Used on plastic-tub GE/Hotpoint and J.C. Penney dishwashers. Used two per machine. Unstretched length=6 ½". Replaces WD1X1147 |
 All springs look alike. Order by model number or part number for correct spring. |
WD1X1154 Door Spring Used on GE/Hotpoint and J.C. Penney dishwashers. Used two per machine. Unstretched length=6 ½". Replaces WD1X1154
|
All springs look alike. Order by model number or part number for correct spring. |
WD1X820 (or WD1X1308) Door Spring Used on plastic-tub GE/Hotpoint and J.C. Penney dishwashers. Used two per machine. Unstretched length=6 ½". Replaces WD1X820 and WD1X1308 |
All springs look alike. Order by model number or part number for correct spring. |
WD1X1333 Door Spring Used on GE/Hotpoint and J.C. Penney dish washers. Used two per machine. Unstretched length=6 ½". Replaces WD1X1333 |
All springs look alike. Order by model number or part number for correct spring. |
WD22X78 Tower Section Used on GE/Hotpoint and J.C. Penney dish washers. Top section of two-piece tower. Replaces WD22X78 |
 |
WD22X120 Pop-up Tower Used on GE/Hotpoint and J.C. Penney dish washers. Telescoping tower for lower spray arm. Fine thread base. Replaces WD22X120 |
 |
WD19X44 Support Nut / Gasket Acts as seal for top of support under spray arm. Replaces WD19X44 |
 |
WD8X157 Gasket Only As above. Replaces WD8X157 |
 |
WD22X114 Spray Arm Support Used on GE/Hotpoint and J.C. Penney dish washers. Replaces WD22X114 and DW112 |
 |
WD1X5488 Rubber Check Valve Used on GE/Hotpoint and J.C. Penney dish washers to control remaining water level after drain cycle. Used in WD22X114 listed above. Replaces WD1X5488 |
 |
WD22X71 Spray Arm Hub Hub with raised top and bearings for use with WD22X94. Replaces WD22X71 and DW113 |
 |
WD22X89 (or WD22X110) Spray Arm Hub Used with WD22X114 support. Flush top and supplied with bearings. Replaces WD22X89 and WD22X110 |
 |
WD12X235 Hub Bearing Plastic bearing for use with WD22X71 and WD22X110 spray arm hubs. Used two per machine. Replaces WD12X235 |
 |
WD26X10013 New Design Pump Package Replaces all side style dishwasher pumps since1970. All parts needed for conversion are included. Replaces WD26X74, WD26X77, WD26X79, WD26X81, WD2610013 and others |
 |
WD12X106 Slinger for Pump Shaft Seal Aligns shaft seal and acts as slinger for any seeped water. Replaces WD12X106 and DW104 |
 |
WD17X57 Seal and Impeller Package Repair kit for WD26X74 and WD26X77 dishwasher pump. Replaces WD17X57 and DW105 |
 |
WD8X181 Gate Arm Shaft Seal Replaces shaft seal for gate arm which operates drain/wash function in WD26X74 and WD26X77 pump. Replaces WD8X181 |
 |
WD22X135 Lower Spray Arm Replaces metal and plastic spray arms using either WD22X110, WD22X71,or WD22X126 support hubs. Replaces WD22X135 |
 |
WD1X5500 Bellows Seal Used on GE/Hotpoint and J.C. Penney dishwashers. Seals between lower spray arm and upper wash tower. Replaces WD1X5500 |
 |
|
|
