|
FOR G.E. WASHERS |
|
|
WH1X1944 Drive Spline Rubber and Aluminum drive spline used on GE/Hotpoint and J.C. Penney washing machines. Replaces WH1X1944 and LP301 |
|
|
WH1X1986 Support for Spline Rubber support used on GE/Hotpoint and J.C. Penney washing machines. Replaces WH1X1986 and LP701 |
|
|
WH8X291 Top Shaft Seal Shaft Seal used on GE/Hotpoint and J.C. Penney washing machines. Replaces WH8X291 and LP602 |
|
|
WH8X291P Top Shaft Seal Same as above but less metal base |
|
|
WH8X281 Lower Housing Oil Seal Rubber lip seal used on GE/Hotpoint and J.C. Penney washing machine transmissions. Replaces WH8X281 and LP604 |
|
|
WX5X1325 Spanner Tool Used on GE/Hotpoint and washing machines built since 1995 to remove large nut under agitator drive block. Replaces WX5X1325 |
|
|
WX1X2083 Clamping Block Chromed bar used on GE/Hotpoint and J.C. Penney washers to lock basket hub in place. Replaces WH1X2083 |
 |
|
WZ1X32 Clamping Block Bolt Chromed bolt used on GE/Hotpoint and J.C. Penney washers to lock basket hub block clamp in place. Replaces WZ1X32 |
 |
|
WH8X367 Lower Plastic Housing Cover Seal Rubber gasket ring used on GE/Hotpoint and J.C. Penney washing machine transmissions. Replaces WH8X367 |
 |
|
WH8X242 Lower Metal Housing Cover Seal Gasket ring used on GE/Hotpoint and J.C. Penney metal housing washing machine transmissions. Replaces WH8X242 |
|
|
WH17X69 Tub Support Tub support attaches to top of transmissions on both large and standard capacity models. Used until 1995. Replaces WH17X69 |
 |
|
WH8X305 Outer Tub Top rubber Gasket Thick black rubber gasket used on GE/Hotpoint and J.C. Penney metal washing machine outer tub. Replaces WH8X305 and LP656 |
 |
|
WH43X102 Agitator Spiral Agitator will replace straight vane or spiral vane models for large capacity tubs. 17" Tall Replaces WH43X102 and WH43X93
WH43X87 Agitator Spiral Agitator will replace straight vane or spiral vane models for standard capacity tubs. 15½" Tall Replaces WH43X87and WH43X91
|
|
|
WH23X42 Pump Used until 1995 on almost all GE, Hotpoint and J.C. Penney model full sizes washers. Replaces WH23X42 and LP112 |
 |
|
WH49X231 Single Speed Clutch Used until 1995 on almost all GE, Hotpoint and J.C. Penney model single speed full sizes washers. Replaces WH49X231 |
 |
|
WH49X265 Two Speed Clutch Used until 1995 on almost all GE, Hotpoint and J.C. Penney model two speed full sizes washers. Replaces WH49X265 |
 |
|
WH8X246 Star Boot Used until 1995 on almost all GE, Hotpoint and J.C. Penney model full sizes washers. Replaces WH8X246 and LP510 |
 |
|
Motor Relays WH12M70 Motor start relay for GE/Hotpoint washers. Replaces WH12M70
WH12X235 Motor start relay for GE/Hotpoint and J.C. Penney washers. For use with up to 3/4 HP motor built 1961 to 1995. Replaces LP230 and WH12X235
WH12X400 Motor start relay for GE/Hotpoint and J.C. Penney washers. For use with up to 3/4 HP motor built 1966 to 1969. Replaces LP231 and WH12X400
WH12X468 Motor start relay for GE/Hotpoint and J.C. Penney washers. For use with up to 3/4 HP motor built 1969 to 1981. Replaces LP232 and WH12X468 |
|
|
WH12X494 Lid Switch Used on all GE, Hotpoint and J.C. Penney model full size washers until 1995. Replaces WH12X494 |
 |
|
WH2X10032 Tub Seal Used on all GE, Hotpoint and RCA model full size washers until 1995. Replaces WH2X10032 |
 |
|
WH1X2089 Lid Switch Actuator Pad Used on GE, Hotpoint and RCA model full size washers since 1995. Replaces WH1X2089 |
 |
|
WH1X2727 suspension Strap Used on GE, Hotpoint and RCA model full size washers since 1995.4 Per machine Replaces WH1X2727 |
 |
|
|
